Effective Solutions for Common Brother Printer Error Codes

Encountering error codes on your Brother printer can be frustrating, interrupting your print job. In this blog, we will provide quick and effective solutions for common Brother printer errors that users often face. Whether you’re experiencing ink cartridge detection problems, connection issues with a Wi-Fi router or WLAN access point, or drum unit errors, we’ve got you covered. We will walk you through troubleshooting methods to fix these problems and get your printer back up and running smoothly. Say goodbye to errors and hello to uninterrupted printing with our proven solutions for common Brother printer errors.

Issue 1: Replace Toner

When your Brother printer shows a “Replace Toner” message, it means that the toner cartridge has reached the end of its life and requires replacement. Simply replacing the toner can fix the error. However, if the issue persists even after replacement, there are quick solutions you can try to resolve the issue here.

Solution:

1. First of all, ensure that you have installed the new toner cartridge correctly.
2. Also, make sure to install the latest Brother Standard toner cartridge.
3. Even if you are using a Brother starter toner, maybe the remanufactured or non-Brother toner is causing the error.
4. Ensure that the toner screen on the LCD matches the color of the toner you have replaced.
5. If they both are not of the same color, replace the displayed toner to rectify the Replace Toner error from the Brother printer.

Issue 2: No Paper

The “No paper” error on your Brother printer indicates a shortage of paper in the tray. However, it can persist even after refilling the tray. Identifying the underlying cause is crucial before trying any troubleshooting steps.

Solution:

1. Firstly, ensure that you load the papers correctly in the paper tray.
2. Also, check if the paper source is correctly selected in your printer driver/application.
3. If the issue persists, use the manual feed slot and change the tray settings to try printing a document.
4. If the printing job is successful, the error message will not appear.
5. You can also check the printer settings to see if they are correctly set.
6. Either you can use the Auto Detect function to resolve the issue.

Issue 3: “Drum Error” or “Clean Drum Unit”

Facing common errors on your Brother printer? If you receive an error indicating a dirty drum unit, simply clean or replace it. Should the error persist after replacing the drum unit, try cleaning the corona wire within the unit to fix the issue.

Solution:

1. First, take off the toner unit.
2. Then, clean the corona wires of the drum unit.
3. After that, slide your blue tab at the front side of your unit.
4. Now, take it to the original position and insert back the drum unit into the printer.
5. If cleaning a drum unit doesn’t resolve the issue, and the Brother printer continues showing errors, you should replace the drum unit with the latest one.

Issue 4: Error 20, 21, 22, 23

Encountering common printer errors 20, 21, 22, 23 that indicate a failure to detect the ink cartridge? The cause may be a laser diode malfunction. Simply power cycling the printer can often resolve this issue. If the problem persists, consider replacing the fuser unit as a potential solution.

Solution:

1. The majority of the time, simply turning the printer off and on resolves the issue.
2. But, if you still face any of these error messages, ensure you load the ink correctly.
3. In case your cartridge is broken, get a new one.
4. And if the ink sensor is not working well, replace the PCB of your Brother printer.

Issue 5: TS-07

Are you experiencing a TS-07 error code on your Brother printer? This error typically occurs when the printer encounters connection issues with the WI-Fi router or WLAN access point, especially when unable to recognize a router or access point with WPS/AOSS enabled. Fortunately, resolving this issue is easy and can be rectified.

Solution:

1. In the first step, you need to ensure that your WLAN access point supports WPS or AOSS. Use the automatic wireless mode with WPS/AOSS to check the settings of your machine.
2. Ensure that your Brother printer is placed close to the router or WPS access point to set up a connection.
3. Keep any device away that may interrupt the signals, such as your phone.
4. Choose your network and turn on the WLAN.
5. When your Brother printer identifies the mode of the WPN access point, the connection will be set up automatically.

Conclusion

To sum up, understanding and troubleshooting common Brother printer errors is imprtant for maintaining smooth printing operations. By following the solutions given in this blog, users can address these errors promptly and minimize downtime. Keep in mind to consult the Brother printer manual or reach out to technical support if needed. With the right knowledge and troubleshooting steps, you can keep your Brother printer running efficiently and enjoy uninterrupted printing.

Source :-

Effective Solutions for Common Brother Printer Error Codes